There is a catch to drywall restore that everyone should know before attempting to “do-it-yourself” for the primary time. Widths, an inside-nook knife, a utility knife, a hammer, a screwdriver, a drywall saw and a drill. Plus, mesh creates a stronger bond between the previous and existing drywall items. Minimize a bit of drywall into a square a bit of bit greater than the opening.
The drywall in most houses is ½-inch thick. Use a small drywall knife to use lightweight joint compound above the screw or nailhead. A technique is to bisect the undamaged piece of drywall at the stud, so half the stud is uncovered, then butt the undamaged and new drywall collectively on that stud.
End the restore with a number of coats of drywall compound. Then apply a barely wider second coat of plaster and flatten it out with the blade of the paint scraper. Outer drywall corners are strengthened with metal or plastic edging, called nook bead. Use an digital stud finder to mark the studs behind the broken drywall, then use a drywall saw or reciprocating noticed to chop away the drywall.
Where a number of screws are placed in a row, spot-patch every with compound and cover them with a strip of fiberglass tape as described within the steps above (picture 3). Measure the outlet then lower a scrap piece of drywall that is slightly larger than the outlet’s diameter.
Rating the again of the drywall with a field cutter or knife about an inch from each side. If the tape is intact and well-adhered, the crack was most likely attributable to the previous drywall compound drying and shrinking. If the damage is proscribed to the drywall compound, merely take away all unfastened materials and apply new compound.