For many home owners, there is nothing more annoying than cracks or harm to their drywall. Continue cutting down the drywall adjacent to the studs till the whole part is removed. Once the first coat of plaster is dry, give it a light hand sand and dirt the surface clean with a rag. Fill the hole with plaster compound and sand the encompassing paint to roughen it up. Now reinforce the outlet with items of jointing tape, cover the tape with a bit more compound and leave it to dry.

As soon as the second coat is dry, smooth it out with one other light hand sand, dust the surface clear and you are prepared for portray. Then use a drywall knife to chop throughout these lines, stopping at studs which are past the broken areas. If tape is only free on one side can slip a putty knife underneath it to loosen, then slip tape and joint compound below whole piece of free tape, then press laborious to wall.

Some repairs also may require a hand sander, a hacksaw, a nail bar and a degree. Use a drywall noticed to chop out the drawn space. The easiest option to repair a medium-dimension hole in drywall is to make use of an adhesive-backed metal patch. Use drywall screws about every eight to 12 inches to attach the drywall to the studs.

There are generally two ways to marry two pieces of drywall together. Take away the damaged piece. We have six other ways to make the restore relying on the dimensions, kind and place of the injury. If tape is bubbled, can puncture and slit with razor blade knife, and slip joint compound into the slit beneath the tape and press laborious to wall.

If there are, don’t cut too deep with the drywall knife. When chopping drywall, measure out the appropriate size, rating the drywall with a box cutter, bend and pop. Shake the can and spray the patch area in a circular motion 6-18 inches from the wall. Even a piece of scrap drywall will work, as long as it has straight edges.